Asin Aqua Oxygen Non-Chlorine and PH Automatic Pool Dosing and Pool Management System

Asin Aqua Oxygen Non-Chlorine & PH Automatic Pool Dosing & Pool Management System 1. Description The ASIN AQUA Oxygen  is a top of the range swimming pool automatic dosing system offered at an amazing priceThe Oxygen model is a non-chlorine pool dosing system which typically uses hydrogen peroxide rather than liquid chlorine to sanitise the pool water.It provides fully automatic control of pool dosing as well as control of the pool circulation pump and pool heating.It is internet enabled allowing remote monitoring of the pool sanitisation, PH and temperature via a smart phone or the internet.The ASIN AQUA Oxygen has four dosing pumps to deliver the highest water clarity:- Sanitiser PH- (acid) Algaecide Flocculant (Note: Pump 3 can also be configure as PH+ (alkali) rather than algaecide if required to give both PH+ and PH- control. )The ASIN AQUA Oxygen has an easy to use colour touch-screen control panelIt comes with a flow meter to detect when the pool circulation pump is running so that dosing only occurs when the pool water is flowing.The ASIN AQUA Oxygen can be used for private or small commercial pools with a water volume up to 250m3It has simple and clear operation, whilst measuring and regulating the sanitiser and PH levels in your pool.This is an automatic dosing system which can be used for both indoor or outdoor pools and spas.It can be used for domestic or small commercial poolsThe system adds a pre-set amount of sanitiser to the pool – measured in ml/m3 per day. It also controls the PH in the pool and adds the required amounts of chemical to maintain the pool at the desired levels.It has an easy to use touch screen control panel, which allows you to set the desired level and monitor the current levels of sanitiser and PH in the pool. 2. ASIN AQUA Oxygen Features High quality stainless steel case Non-chlorine pool dosing system Colour Touchscreen Easy operation Multi-language menu Compact design 4 x Peristaltic pumps Easy installation Advanced safety features Water-flow meter with built in strainer RJ45 Ethernet connection to allow internet access Thermometer measures pool water temperature Timer control of pool circulation pump Optional frost control of pool circulation pump Optional pool water level control Includes floc mixer Sanitiser control and dosing The ASIN AQUA provides highly effective disinfection treatment of pool water for public and private pools. Precise measuring of sanitiser content in the pool waterThe system adds a pre-set amount of sanitiser to the pool – measured in ml/m3 per day.A typical dose rate is 10 ml/m3 per day pH control and dosing ASIN AQUA Oxygen is adjustable to dose pH MINUS or pH PLUS. Treatment for stabilizing of pool water acidity at the optimum level. Precise measuring by pH probe combined with the system digital intelligence controls the preset pH level of the circulating pool water in all pool operation modes and variable environment conditions. Algaecide daily dosing The ASIN AQUA can dose a small amount of algaecide to both outdoor and indoor pools. The regular addition of algaecide prevents the growth of all types of algae, mould and bacteria. Flocculant Adding a small amount of flocculant to the pool water improves the efficiency of the filtration process.The effect of this is to greatly improve water clarity.Slow continuous dosing of flocculation and coagulation aids that improves the capability of filtering so even the smallest invisible water impurities that are in standard conditions become unable to pass through the filter. 4. Included in the Box The ASIN AQUA includes everything required to install the dosing system (apart from the pool chemicals and optional bund tanks) ASIN AQUA Dosing System pH Probe 4 x dosing valves 4 x tube weights (go on the end of the tube in the chemical container to ensure the tube stays at the bottom of the container) 2 x connection valves – control the flow of water to the water sampling circuit Pool test kit (PH and Chlorine) Knife to cut tubes Plastic tubing Water temperature sensor and pocket Also included is the easy to read user manual which explains how to install and operate the system and also the water temperature sensor and pocket 5. Typical Installation Diagram Pool water is constantly sampled to measure the PH level via a water sampling circuit – below Pool water sampling circuit shown above Chemical connections shown above The ZPM (Zeta Potential Mixer) is included with the Asin Aqua Oxygen and mixes the flocculent into the pool water (Note that the flocculent is added before the filter)The dosing valves supplied can either be installed directly into a pool elbow or via an optional threaded connector into a t-piece Example of injectors installed into 1.5″ t-pieces. A hole is drilled and then tapped with a G 1/4″ thread  Injectors installed into a 50mm t-piece with the threadedend-ca

For more information on Asin Aqua Oxygen Non-Chlorine and PH Automatic Pool Dosing and Pool Management System talk to HeatPumps4Pools Ltd