Automatic Tyre Machine and Balancer Package

This is our REDATS fully automatic tyre changing package, it is one of our mid-level packages designed to be affordable and robust. This is the Redats M-221F-3D tyre machine, it is a fully automatic tyre changer machine with a 3-point assist arm to help you tackle low profile and run flat tyres which have become standard in the tyre market these days. This tyre machine operates on 240V and an air supply. Work with ease! This tyre changer was designed to make your daily work much easier - the head can be regulated and inserted into one of two sockets. There are also spacy shelves for the accessories that you need in your daily work so, you will have them all at hand! Third hand as standard This tyre changer is equipped with the third hand - it locks the parts of the tyre bead below the rim edge, which means a much easier work while you are demounting tyres. Easy tyre demounting Thanks to roll and a round ending of the assistant arm, demounting the tyre is even easier than ever. Application This tyre changer is designed for work with tyres of passenger cars. Thanks to the assistant arm, it could also be used for low-profile or run-flat tyres. Unit ready for operation This tyre changer comes with all the accessories essential for daily operation: FILTERING-GREASING UNIT: OILER + WATER SEPARATOR TYRE INFLATION GUN PLASTIC OVERLAYS FOR DUCKHEAD (ROLLER AND PROTECTOR) PLASTIC OVERLAYS FOR JAWS - 4 PCS TYRE LEVER ACCESSORIES BUCKET 3D1 ARM (ROLLER, PLATE, CENTERING CONE) THE TYRE CHANGER CAN BE UPGRADED WITH A LEVERLESS ARM (TO BE PURCHASED SEPARATELY) AUTOMATIC TYRE CHANGER POWERED WITH 230V (ONE-PHASE) AN AUTOMATIC TYRE CHANGER - IT SAVES OPERATORS’ TIME. A TYRE CHANGER FOR CAR AND VAN WHEELS - UP TO 24” (INTERNAL CLAMPING) AND 21” (EXTERNAL) TYRE CHANGER READY FOR RUNFLAT/LOW-PROFILE TYRES (ARM IN STANDARD) UNIT POWERED WITH 3-PHASE (400V) POWERFUL TYRE CHANGER: BEAD BREAKER FORCE 2500 KG   The REDATS W-220-wheel balancer is designed to deal with wheels of cars and car-derived vans: Automatic - saves a lot of time This is a semi-automatic wheel balancer machine. It will read out all the wheel parameters except the width of the wheel, so the operator saves a lot of time.   Extremely easy use!   Learning to operate the tyre balancer takes a few seconds only. The unit shows the imbalanced spot. It comes with an imbalanced spot positioner - electromechanical brake, sound signal and diodes on the control panel.    Working tempo Reading out parameters takes a second only. This means much quicker work. Plus, to that, all wheel data (rim diameter, distance) can be read out by a measuring gauge - so there is no risk of errors!    Hassle-free operation Autocalibration programs are easy to do - it takes just 2 buttons to calibrate (distance gauge, diameter gauge, balancing sensors).   Rim diameter - 10" - 24" Rim width - 1,5" - 20" Power source - 230V 50Hz Hidden weight programme ALU wheel programs 3 Max wheel weight - 65 kg Measuring cycle time - 8 seconds Shaft blocking Electromechanics brake Imbalance positioning LED lights, sound signal Automatic data entering diameter. Weight 76 kg

Garage Equipment Group supplies dependable garage and workshop equipment to automotive businesses across the UK and worldwide. The company supports independent garages, MOT testing stations, tyre centres, dealerships, bodyshops, fleet workshops and mobile tyre-fitting businesses with practical equipment chosen to improve safety, efficiency and everyday productivity.

Its extensive product range includes vehicle lifts, tyre changers, wheel balancers, wheel alignment systems, brake testers, complete MOT bays, air compressors, diagnostic tools, air-conditioning stations, motorcycle equipment, workshop presses, trolley jacks, oil drainers, hand tools and spare parts. GEG also provides mobile tyre-fitting packages, allowing businesses to create fully equipped service vans capable of carrying out tyre fitting, balancing and replacement work at customers’ locations.

Clients benefit from knowledgeable advice provided by experienced sales staff with hands-on automotive backgrounds. This helps customers select equipment that suits their available space, workload, vehicle types and budget, rather than simply purchasing unsuitable machinery. GEG stocks equipment from trusted brands, including its established Eurotek range, and offers options for new workshops, expanding businesses and replacement installations.

Alongside equipment supply, the company provides support with product selection, workshop planning, finance and leasing options, warranty registration, claims, instruction manuals and replacement parts. By combining a broad product range with industry knowledge and responsive customer support, Garage Equipment Group helps automotive businesses build, upgrade and maintain professional workshops with minimum disruption or downtime.

For more information on Automatic Tyre Machine and Balancer Package talk to Garage Equipment Group