Ajax Superior MultiRelay Fibra ASP

Ajax Superior MultiRelay Fibra Four-channel relay with remote control Advanced automation for greater safety Superior MultiRelay Fibra is a relay module designed to implement complex wiring diagrams. It has four relays with potential-free (dry) contacts that can control four separate circuits independently. MultiRelay can integrate various appliances, electrical mechanisms and even third-party security devices into the Ajax system. With Ajax scenarios, the module provides fully automated actions in response to alarms and security mode changes or performs them by a specified schedule. Key features 4 independent relays Automation scenarios Remote control and configuration Potential-free contacts - operate with both AC and DC circuits In-line connection with different types of devices 2 operation modes Informative in-app notifications Up to 0.18 W low power consumption Up to 2,000 m range of communication with an Ajax Hub Protection against overheating Tamper alarm Steady contact state Smart security and comfort Use automation scenarios to make life safer and more comfortable. Set your office lights to turn off automatically on arming. Program your projectors to turn on when outdoor motion detectors identify intruders. Or turn on your toaster at a certain time in the morning. 5 automation elements with MultiRelay 4 separate circuits control The module has four relays that can control four separate circuits independently, meaning it can maintain four different appliances or electric mechanisms. Automation scenarios can be configured for each relay separately. Also, several relays can be connected to control one device if required by the wiring scheme. Impulse and bistable modes Each relay supports two operation modes: Bistable � the relay changes contact state after each activation, turning the connected appliance on or off. Pulse � the relay changes contact state for the adjustable time (from 10 s to 2 h). The mode can be configured in Ajax apps for each relay separately. Support for both AC and DC circuits The module has relays with potential-free (dry) contacts and can control circuits with direct, alternating, or no current. Steady contact state The device retains the current contact state of a relay. After a power loss and subsequent restoration, the contact state remains unchanged. The feature can be activated in Ajax apps for each relay separately. Configurable NC/NO contact states Each relay supports two contact states: Normally closed (NC) � the relay stops supplying power when activated and resumes when deactivated. Normally open (NO) � the relay supplies power when activated and stops when deactivated. The normal contact state can be configured in Ajax apps. One multi-purpose casing The convenience for PROs is a big priority, so Ajax products are always thought out to every detail, hence easy to work with. That�s why we created Case, a one-stop casing suitable for module-type Fibra devices. Various size options facilitate combining multiple modules, optimizing space and reducing installation expenses. MultiRelay is compatible with Case2 and can be installed in a single casing with other devices. Unique wired technology Fibra is proprietary Ajax technology for secure two-way communication between devices and a hub or module that extends the Fibra line. Fibra features encryption and device authentication to prevent sabotage, spoofing, and data theft. The Fibra line supports all types of devices, including sirens, keypads, and detectors with photo verification. Energy efficiency as a priority Fibra communication requires minimum power consumption: the module consumes only up to 0.18 W at its peak. Fibra also follows the TDMA principle. Each device has a short time frame to exchange data with a hub, and its communication module is inactive the rest of the time. This significantly reduces power consumption and helps avoid interferences even when multiple devices communicate simultaneously. Sabotage resistance Tamper alarm MultiRelay needs to be installed into Case, which has a built-in tamper. The tamper notifies the security company and users about attempts to open Case or detach it from the surface. Data encryption All data the system stores and transmits is protected by a block cypher with a dynamic key. Encryption makes it extremely difficult to reprogram the device, replace or steal the data. Regular polling The device regularly exchanges data with the hub. The system controls each device state and reports if there is a malfunction or connection loss. Protection against short circuit The system instantly detects a short circuit on the line and notifies the security company and the users. And when the problem is fixed, there is no need to replace the fuses: the system will restore operation automatically. Data-rich notifications The Ajax system instantly notifies about alarms and events with informative notifications: security companies and users know exactly which device triggered, when and where it happened. Device authentication against spoofing The hub checks the device's unique parameters for authentication during each communication session. If any parameter fails the check, the hub ignores device commands. PRO is king The myth about wired systems being difficult to install is busted. Ajax minimized an expensive, long, and dusty experience for PROs by developing an ultimate set of tools to make the process easy and flexible, from project design to client support and system maintenance. The module is installed inside Case with only one move of the hand. Intuitive Ajax apps help quickly make the device a part of the system, and each device can always be reconfigured remotely without site visits. No need for programmers � everything is available out-of-box. Installation Setup Configuration Monitoring The module needs to be installed into Case. The installation kit includes all the necessary fasteners. The casing has holders for device placement which are flexible and require only one move of hand to install the module inside. A built-in spirit level and slightly bigger fixing points assist the professional in a perfectly accurate mounting position. Inside, Case has special fasteners for cable management and several perforated parts on the sides and back for wiring out cables. Markings for drill positioning and special protectors inside help to stop the drill before it hits holders or other components. The top lid of the casing is equipped with anti-falling screws to prevent accidental dropping of installation parts. The device is paired with the hub automatically via Fibra line scanning. This tool is available in the desktop or mobile PRO apps. An installer only needs to name the device and assign it to the room and security group. The device can also be added by scanning the QR code or entering its ID manually. Intuitive Ajax apps provide remote set-up and all device information from anywhere the Internet is available, on a smartphone or PC. An installer can remotely change the settings and provide services in-time. No need to visit the object. MultiRelay has two-way communication and ultimate informativeness. The security company will receive an alarm notification in less than a second. Notifications include all the necessary information: name of the device, time of the event, and even the exact room where the device is located. CMS also receives photo verification, capturing the reason for the alarm.

Firesense is a leading independent UK distributor of fire detection, fire safety and security equipment, supporting professional installers and businesses across the country. Established in 1992 and based in Tunbridge Wells, the company has more than 30 years of experience within the fire and security industry.

Originally founded as a specialist manufacturer of conventional fire alarm control panels, Firesense has developed into a comprehensive supplier of fire detection, security, emergency lighting and life safety products. The company works with a wide range of recognised manufacturers, helping customers access reliable equipment for projects of different sizes and requirements.

Firesense supplies conventional, addressable, wireless and two-wire fire alarm systems alongside detectors, control panels, manual call points, sounders, cables, batteries, emergency lighting, fire alarm testing equipment and related accessories. Its expanding security range also includes CCTV, intruder alarm, access control and smart security solutions.

A key strength of Firesense is its experienced technical and account management team. Customers can receive practical product guidance and support when selecting equipment, designing systems or resolving technical enquiries. As an independent distributor, Firesense can recommend suitable products from across its available ranges rather than being restricted to a single manufacturer.

With extensive stock held at its Tunbridge Wells distribution centre, Firesense aims to provide fast and reliable nationwide supply, including rapid dispatch and trade counter collection.

For fire detection, security or life safety equipment, visit the Firesense website or speak with their experienced team for product advice, availability and help with your enquiry.

For more information on Ajax Superior MultiRelay Fibra ASP talk to Firesense Limited