Ajax Manual Call Point (Green) (8EU) ASP

ManualCallPoint (Blue) Jeweller Wireless resettable button featuring programmable scenarios. Blue-colored version Lightning-fast commands at critical moments In a life-threatening situation, ManualCallPoint Jeweller saves precious time. The button triggers an alarm and automation scenarios, and the system immediately follows the commands. A single press activates intrusion sirens and buzzers of all fire detectors in the system, informing users to evacuate. And scenarios de-energize the facility, unlock exits, or turn on ventilation or emergency lights to assist evacuation. All the data is instantly available in Ajax apps and the CMS, including which button was pressed, as well as when and where it happened. Once the danger has passed, ManualCallPoint Jeweller is reset using a bundled key. Key features Automation scenarios Activate emergency lights Control the ventilation system Unlock electric locks De-energising the facility Activation of fire detectors by pressing the button Informative push notifications Up to 1,700 m of communication range with an Ajax hub Up to 7 years of battery life Resilient button mechanism Remote control and configuration Jeweller radio communication SmartBracket maouting panel featuring tamper alarm Cover flap included Instant, precise, and detailed alerts When every second counts, clear and informative alerts are essential to cut response time. So are fail-proof ways to activate them. With intuitive apps and ManualCallPoint Jeweller�s reliable hardware, Ajax delivers both. The apps allow for configuring a certain alarm type for each ManualCallPoint Jeweller. The device, in turn, ensures fast feedback while effectively communicating the nature of the incident to users and CMS. Fire alarm Auxiliary alarm Panic Gas Alarm Malfunction Leakage Automate every safety measure ManualCallPoint Jeweller can perform both simple tasks, such as unlocking an electric lock or powering off an appliance, or run complex scenarios involving dozens of relays, smart sockets, and switches. Automation scenarios are configured in Ajax apps, all plain and intuitive. Set any programmable action regardless of the device version Configure automation scenarios via Ajax apps Trigger one or multiple actions at once with a single press A part of an advanced fire alarm system Pressing ManualCallPoint Jeweller activates the built-in buzzers of all fire detectors in the system. Additionally, the button can also activate intrusion sirens. An alarm is instantly sent to users and the central monitoring station (CMS). As part of the Ajax ecosystem, ManualCallPoint Jeweller interacts with automation devices, cameras, and MotionCam (PhOD) detectors to speed up evacuation and ease firefighters' access to the building. In case of a fire alarm, WallSwitch Jeweller de-energizes the facility, and Relay Jeweller activates emergency lights and exits. In a matter of seconds, Ajax apps receive visual verification to identify the cause of the fire. Activating fire detectors� buzzers Triggering security system�s sirens Running automation scenarios Critical notifications in Ajax apps Visual verification to identify the fire cause of Alarm delivery to CMS Simplified yet flawless hardware ManualCallPoint Jeweller has a thoughtful and reliable button-press mechanism. A minor failure can be crucial in a critical situation, so the mechanism is simplified to several solid parts. Thus, the button cannot get stuck or fail to activate physically, and the possibility of failure in moments of emergency is reduced. The button is designed for more than 500 presses throughout its lifecycle. If the button has triggered once, it will reliably continue to do so. Ajax rigorously tests 100% of the production during manufacturing. If the button passes testing upon installation, it will definitely raise an alarm when needed. Mechanism with reduced failure risk Designed for 500+ presses Automatic self-diagnosis of each device Advanced system supervision ManualCallPoint Jeweller is a part of the Ajax ecosystem, transforming the button into a genuine IoT device. Each element of the ecosystem is constantly supervised. The button exchanges data with a hub via Jeweller radio protocol. The hub has two-way communication with Ajax Cloud, which provides real-time information to Ajax apps. The device does not require periodic testing by triggering to ensure it operates properly � the Ajax system supervises its state every minute. The enclosure has a tamper to notify the security company and users if someone tries to dismantle ManualCallPoint Jeweller from the mounting panel. And if a button has a malfunction, you will receive a notification specifying the problematic device on the premises. IoT device 12 s of a minimum polling interval Instant maintenance notifications Tamper alarm Stable performance for years The button combines seamless wireless connectivity, data-rich notifications, and supervision capabilities with outstanding longevity. The device operates for up to 7 years on the included batteries. When the time comes, the Ajax system will notify you in advance about the need for battery replacement. Up to 7 years of battery life Low battery warning Precise facility observation Data-rich notifications Ajax apps instantly notify about any event in the system and support critical alerts. Security companies and users know exactly which device triggered, when and where it happened. The system controls each device state and reports if there is a malfunction or if it's time to replace the batteries. Detailed event log The event log records 500 recent events within the system. The data is explicit with the device, time, and event description. It helps reconstruct the actual event and find the causes to obtain comprehensive information for firefighters or an insurance company. Monitoring with PRO Desktop A building administrator can monitor not only security but also buttons and automation devices. The status, event log, and battery data � a CMS operator gets the whole picture in one intuitive interface, all informative and centralized. An installer can remotely change the settings and provide services in time. Unique wireless technologies The Ajax system uses two-way secure radio communication based on the Jeweller proprietary protocol. It supports block cipher encryption and device authentication on every session with the hub to prevent sabotage, spoofing, or data theft. Up to 1,700 m of radio communication with a hub Encrypted two-way radio communication Notifications about jamming and connection loss Effortless installation and maintenance ManualCallPoint Jeweller is ready to go straight out of the box. There is no need to disassemble the button during installation. The Ajax apps are designed to include the device in a system in a few clicks. Later, an installer can change the settings remotely � no need to make unnecessary trips. The button does not require regular manual testing: a self-test system automatically reports the device state to the hub. After activation, the button must be manually released using the key (included in the complete set). Connection Installation Setup Maintenance Pairing with the hub via QR code SmartBracket panel � no need to disassemble the enclosure Configuring and testing through mobile and desktop apps The button does not require regular manual testing; to reset the button after activation, use a key tool (included in the complete set)

Firesense is a leading independent UK distributor of fire detection, fire safety and security equipment, supporting professional installers and businesses across the country. Established in 1992 and based in Tunbridge Wells, the company has more than 30 years of experience within the fire and security industry.

Originally founded as a specialist manufacturer of conventional fire alarm control panels, Firesense has developed into a comprehensive supplier of fire detection, security, emergency lighting and life safety products. The company works with a wide range of recognised manufacturers, helping customers access reliable equipment for projects of different sizes and requirements.

Firesense supplies conventional, addressable, wireless and two-wire fire alarm systems alongside detectors, control panels, manual call points, sounders, cables, batteries, emergency lighting, fire alarm testing equipment and related accessories. Its expanding security range also includes CCTV, intruder alarm, access control and smart security solutions.

A key strength of Firesense is its experienced technical and account management team. Customers can receive practical product guidance and support when selecting equipment, designing systems or resolving technical enquiries. As an independent distributor, Firesense can recommend suitable products from across its available ranges rather than being restricted to a single manufacturer.

With extensive stock held at its Tunbridge Wells distribution centre, Firesense aims to provide fast and reliable nationwide supply, including rapid dispatch and trade counter collection.

For fire detection, security or life safety equipment, visit the Firesense website or speak with their experienced team for product advice, availability and help with your enquiry.

For more information on Ajax Manual Call Point (Green) (8EU) ASP talk to Firesense Limited