Sika Pyroplast Intumescant Top W (MATT White )

Sika Pyroplast Top W forms a carbon char when affected by heat as it uses a water based fire protection coating intended for internal use. This is a 2 pack coating you will require Sika Wood P Base Coat . See Product Here. Sika Pyroplast system slows the spread of flame on natural wood & wood by-products. Sika Pyroplast contributes a beautiful option to architects, builders and end-users, all while accentuating the interior composition of timber arrangements. USES Lessens the combustibility of hard- and softwood > 10 mm thickness and other timber by-products, such as plywood, chipboard, fibre insulation board, hardboard and also on veneering > 12 mm thickness. Shields against heat, checks fire, restricts the generation of fire and spread of flame and reduces flue-gas temperatures. Sika Pyroplast system should not be used in areas of high humidity, heat sources or on surfaces where significant physical impact is likely. PROPERTIES Water based coating system VOC Sika Pyroplast Wood P: 0 g/l VOC Silka Pyroplast Top W: approx. 48 g/l Free of Halogens and aromatic solvents Low material consumption Simple application No additional statical load of coating Individual coloration possible with topcoat Silka Pyroplast Top W TESTS Approval/Standards Silka Pyroplast Wood P is classified to many standards worldwide including EN 13501-1, Bs1d0. PRODUCT DATA Colour Shades: Sika Pyroplast Wood P Primer: white Sika Pyroplast Wood P: white, black on inquiry Sika Pyroplast Top W: available in all RAL colours, others available on request Packaging: Sika Pyroplast Wood P Primer: 5 kg, net weight Sika Pyroplast Wood P: 5 kg and 25 kg, net weight Sika Pyroplast Top W: 3 l and 11 kg, net weight Imdg-Code-No Not applicable SHELF LIFE 18 months, in cool and dry storage conditions and original unopened containers. Protect against frost! SYSTEMS Coating Systems: Primer (if necessary), Sika Pyroplast Wood P Primer Intumescent coating, Sika Pyroplast Wood P Topcoat, Sika Pyroplast Top W Surface Preparation: Substrate must be dry, free from dust, oil, wax, grease, dirt, resin, etc; Existing coatings with poor adhesion have to be completely removed, e.g. with solvent-based paint stripper or to be rubbed down. Surfaces that have been treated with non-acid resistant coatings or release agents such as emulsion paints containing lime, chalk or lithopone should be rubbed down completely. Timber substrates with wetting difficulties should be roughened thoroughly with abrasive paper. Pre-Treatment with Wood Preservatives: If resistance to wet rot, fungi or insect attack is requested, we recommend using commercial preservative agents based on oil alkyd resins provided they are compatible with the Sika Pyroplast fire protection system. Apply Sika Pyroplast fire protection coating system only after the preservative treatment is completely dry. The moisture content of the timber should be below 15%. Sika Pyroplast Wood P Primer may be used to allow sufficient adhesion or avoid diffusion of wood ingredients on resinous wood.

For more information on Sika Pyroplast Intumescant Top W (MATT White ) talk to Eco-Sol Ltd