Revolving Door Pivot Closer

The D&E NHNPDC103WR & NHNPDC103WRS door closers are part of NHNs Flagship Pivoting Door Closer Range.   

Incorporating the latest cam type technology, the NHNPDC103WR & NHNPDC103WRS pivot closers offer easy opening with increased efficiency on the closing torque.

Suitable for Timber, Aluminium and steel revolving doors (360 degrees).

• Closing speed is adjusted via one adjustment valve.
• Narrow style with high performance.
• Easy opening by low opening resistance.
• Quick & easy installation.
• No preparation on the floor needed so reduces labour cost & install time.
• Simple final adjustments, 3mm backwards / forwards, 3mm left / right, +/- 4 degrees on alignment.
• Temperature -20 degrees - +40 degrees Celcius.

Pivot closer options:

• NHNPDC103WR/SSS - Non Hold open
• NHNPDC103WRS/SSS - Hold open at 90 & 270 degrees (+/_ 1.5 degrees_.

Finish:

Floor Cover Plate: Satin Stainless Steel - Supplied as standard.

Technical specification:

• Door weight: Up to 100kgs.
• Door width: Max. 1500mm (Centrally pivoted).
• Max. Opening angle 360 degrees.

Door thickness:

• Timber: minimum 44mm
• Steel / Aluminium: minimum 38mm

10 years no quibble guarantee

High efficiency

Providing over 70% efficiency, the NHNPDC100 series combines light opening pressure with a smooth closing motion. The curves on the chart below show the effect of the cam type pinion.

All NHNPDC103WR & NHNPDC103WRS models are supplied complete with top pivot set.

Fixing screws for timber, steel & aluminium doors are also supplied.

For more information on Revolving Door Pivot Closer talk to D & E Architectural Hardware Ltd