MAG 5100 W - DN25 :: SIEMENS ELECTROMAGNETIC FLOW METER

The MAG 5100W is an economical electromagnetic flow sensor designed to meet ground water, drinking water, waste water or sludge applications . Used in applications where high accuracy and long service intervals are a must. The standard meters are Mains powered 115-230 V AC 50 - 60 Hz (IP67 Rated) but other power options are availble including 11-30V DC/11-24V AC 50/60 Hz . This item is for: Size = DN25 / Qmax 17m3/hr Max Temp = 50C Outputs = 2 Pulse outputs Flanges = PN10/40 Liner = NBR - Hard Rubber Electrodes AISI 316 Ti (1.4571) MAG 5100W complies with the OIML R49 and ISO 4064 water meter standard and is specially engineered for stand-alone water applications.: The unit also has MCERTS Certification, required by the Environment Agency (EA) for effluent flow discharges into rivers, watercourses the sea & public sewers, effective Jan 2009. Applications: Revenue metering - Provide correct billing and monitoring of consumption. Flexible power supply makes it useful for leak detection (see BREEAM water leak detection regulations) Irrigation - Ensure long-term performance for optimal ownership MAG 5100W is optimised for leakage detection and is often used for accurate billing. Installation is easy - there is a simple sensor that needs to be bolted in place before operation. Connect the power, the flowmeter comes complete with a compact or remote transmitter with factory mounted cable . There will be no need for regular maintenance. High accuracy down to 0.25% of rate (Standard unit 0.5% UKAS Certified). Bi-directional measurement Repeatability of 0.1% Long lasting performance 6 years operation in typical revenue applications No moving parts that wear and tear Coned flow tube design for optimal low flow detection (WRc and NSF drinking water approved) Robust construction built to resist environmental influence

For more information on MAG 5100 W - DN25 :: SIEMENS ELECTROMAGNETIC FLOW METER talk to Bell Flow Systems