Details To Remember During Mould Modification

One of the most important tools our company provides is the mould reamer. This is a very useful tool when you are working on a mould repair project. Thanks to these reamers, you have the means to fix any faults comprehensively. For example, they can ensure that the inner surface of the mould is smooth so it does not ruin the product you are casting. Prototyping is one of the most important parts of the mould modification process. Its purpose is to make certain your design is suitable for production. You can also utilise it to find faults so you can rectify them. If you do encounter complications, you will need to fix them or acquire new components. This might demand an entirely new mould or one part of a new mould. Alternatively, it could be done merely by altering the current one. That can save time and money. If you decide that you intend to try a mould modification, there are certain points you must keep in mind. CUTTING DEPTH Firstly, we will talk about the minimum cutting depth. When you are milling moulds to alter the part geometry, minimum increments exist by which you can remove metal. For instance, it is possible to get rid of 0.010 in of metal from one of your moulds. However, there could be difficulties removing anything less. This is due to the minimum cutting depths for milling. PARTING LINE CHANGES There are also the parting line changes to consider. Expanding one part at this point is almost always going to require a new mould. That is because it can influence mould features like venting and gating. Gates are channels, usually positioned in the parting line, where your material enters the part cavity during the injection process. Vents are small channels that are cut into the parting lines. This is to release air that is within your mould during injection. Vents tend to be around the part's perimeter. You can't normally alter or move them once they are in position. CHOOSE US WHEN YOU NEED A MOULD REAMER At Penico Gauges, we sell our mould reamers in a myriad of sizes. Therefore, we can produce designs suitable for every mould size. We also have two special reamer styles in the form of Carbide Tipped and High Speed Steel. They are suitable for different mould materials, including iron. So, if you are interested in our mould reamer merchandise and want to know more, feel free to contact us. You can tell us about your moulds and we can suggest the right products to use for maintenance and modification.

For more information on Details To Remember During Mould Modification talk to Penico Gauges Ltd