JAEGGI ADC High Density: Maximum performance per floor space

The development of the JAEGGI ADC High Density focused on maximum power density. As a result, these devices are ideal for high-performance applications such as IT system cooling, and more. Extremely compact, enormously powerful The extremely compact cube with a minimal footprint offers enormous performance even in dry operation and thus a high switching point for the activation of the adiabatic pre-cooling unit. This is appropriate for maximum power over the entire height of the cube. All attachments and components are integrated in the housing. Even the powerful super-low-noise fans are not visible from the outside. Adiabatic pre-cooling system If the dry operation is no longer sufficient, z. B. at high outside temperatures or high plant loads, quasi the power boost is turned on with the adiabatic pre-cooling. Thus, a media-side cooling below the ambient temperature is possible. Perfect to adapt, easy to introduce The ADC High Density can be easily adapted to a wide variety of requirements: Different material combinations, tube materials and geometries, as well as different tube configurations and lamella spacings predestine the powerful cube for a tailor-made design. Add to that the ideal mass for standard low loader transports. And with the torsion-resistant construction as well as the pre-assembled eyebolts, a simple crane transport without a crossbeam is possible. Intelligent control saves operating costs The Hybrimatic intelligent control unit permanently records the amount of water dispensed, the speed of the fans and the condition of the ambient air. The necessary information, z. As the fan speed are read out via the bus communication from the Güntner Motor Management GMM. Alternatively, this speed information can be transmitted via a 0-10 V signal. The Hybrimatic is also able to carry out an operational cost review during operation. On the basis of this, the integrated cost management function continuously decides whether the application of water or the change of the speed is the more cost-effective and therefore more efficient operating mode - saving money. For this purpose, the amount of water consumed is permanently recorded in this system. Efficient humidifying system, hygienic operation In this efficient humidification system, the easily replaceable humidifying mats are supplied with as much water as is necessary under the circumstances. So the water consumption is minimized, and it can come to no standing water. In case of inactivity, the pre-cooling unit is automatically emptied. Due to the separation of pre-cooling unit and heat exchanger it remains completely dry. Thus, the device does not fall under specifications such. For example, the 42nd BImSchV in force in Germany. The well thought-out design of the ADC High Density incorporates the acknowledged rules of technology regarding the hygienic operation of evaporative cooling systems. Easy inspection, cleaning and maintenance The ADC High Density is easy to work with: thanks to the large, lockable inspection door, all interior components are easy and quick to reach. This simplifies all inspection, service and maintenance work. All spare parts are available worldwide, and the JAEGGI service staff are also quickly on site after consultation. The scope of service includes all work over the entire life cycle - from commissioning to disassembly.

For more information on JAEGGI ADC High Density: Maximum performance per floor space talk to JAEGGI HybridTechnologie AG