LEGK2 - T Type Premier Legionnaires Temperature Kit

Product Code: LEGK2

Free UKAS Traceable Calibration Certificate Included* LEGK2 T Type Premier Water Temperature Testing Kit with MM7000-2D Barcode Scanning Thermometer, Surface and Immersion Probes, Fine Wire Probe and accessories. Designed for use in monitoring the temperature of both running and standing water, as well as the surfaces of pipes and tanks that form part of a water system. The inclusion of the MM7000-2D Barcode Scanning thermometer enables the user to record locations, asset numbers and personalised temperature alarms.

Features MM7000-2D Handheld Thermometer

•Measurement Range : -200 to + 1820°C (probe dependent)

•High Accuracy ±0.2°C ±0.1% of Reading

•Temperature Alarms: - user-programmable for personalised needs

•Stores up to 1,000 readings

•Bluetooth Communication: - download data to PC via Bluetooth

•Free downloadable software

•Readable 1D and 2D Bar Codes include (but not limited to): -All UPC/EAN/JAN Codes, QR Code, EAN29 Codes, Code 39 and Code 128

•°C/°F Selectable

•Switchable thermocouple Types K / T / J / R / N / E / S

•IP65 Casing

•Low Battery Indication

•Rubber Boot included with the thermometer for extra protection against damage

•FREE UKAS Traceable Certificate at points 0, +50 and 150 °C*

•Thermometer can be used with other 2-pin Thermocouple Probes * Please note: The free certificate is for the handheld only. The temperature points cannot be changed or added to Probes

•Measurement Range TS07 High Temperature Surface Probe: -50 to 400°C TM03 General Purpose/Immersion Probe: -200 to 400°C TA01 PTFE Thermocouple Fine Wire Sensor: -100 to 250°C

•Probe Measurements TS07 High Temperature Surface Probe: 110mm x 6mm TM03 General Purpose/Immersion Probe: 100mm x 3mm TA01 PTFE Thermocouple Fine Wire Sensor: 1m x 0.3mm Accessories TAPS - Thermocouple Attachment Pads. For use with fine wire probes to adhere the sensor to a pipe or tank and leave in situ. Can be used in temperatures from -50 to 250°C LEGC01 - Keeps everything together and protected. Measures 34cm x 26cm x 6.5cm (approximate external) Holds up to 1 x Handheld thermometer, 2 x Straight Handled Temperature Probes, Fine Wire Probes and batteries Contents MM7000-2D ThermoBarScan 1D/2D Barcode Scanning Thermometer with Bluetooth TS07 Surface Probe TM03 General Purpose/Immersion Probe TA01 K Type PTFE Insulation Fine Wire Thermocouple LEGC01 Carry Case TAPS 1 x PP3 Battery # Note: This kit contains a sheet of 20 TAPS. The above link leads to the additional books of 100 available

For more information on LEGK2 - T Type Premier Legionnaires Temperature Kit talk to TM Electronics (UK) Ltd