RC-28v.2 IP Remote Control System

RC-28v.2 IP Remote Control System The RC-28 IP Remote Control System, allows Radio Amateurs to remotely operate selected Icom amateur transceivers. Incorporating the RS-BA1 Version 2 software, the RC-28v.2 comes complete with remote control USB encoder and will work with the IC-7100, IC-7200, IC-7300, IC-7410, IC-7600 & IC-9100 via USB, and with the IC-7610, IC-7700, IC-7800, IC-7850 & IC-7851 via an ethernet cable. Dualwatch, Dual Spectrum Scope Control The dualwatch operation and dual spectrum scopes with the waterfall functions* can be used on your remote PC. MAIN and SUB spectrum scopes can be observed on the RS-BA1 Version 2 at the same time. * The dualwatch and dual spectrum scope functions are only for the IC-7851, IC-7850 and IC-7610. The spectrum scope functions (single receive) are usable with the IC-7300. Added Functions Most functions and modes of your transceiver, including interference rejection functions and IF filter settings, can be controlled using the CI-V commands. The following functions are added to the RS-BA1 Version 2. • Panel size can be enlarged (Normal or large size selectable) • Indicator click operation to change the settings • RIT and ?TX functions • [MUTE] button • SUB dial Low Latency, High Quality Audio Over an IP Network The RS-BA1 Version 2 offers real-time operation with low latency, high quality audio. You can use the transceiver installed in another room using your home network, or even from a remote location over the Internet*. * A static public IP address or Dynamic DNS is required for the base station (Server) PC, when you configure the remote control system through the Internet.

For more information on RC-28v.2 IP Remote Control System talk to Icom UK Ltd