DC Current Or Voltage 1 In 3 Out

DescriptionDIN rail mounting transducers available in 55mm x 112mm or 100 x 112mm DIN ?rail casesApplicationUsed to conver various inputs into standard DC signals for driving panel meters and for use in control devices.Selection GuideM100-DM3One input three outputsTypical ApplicationsThe M100-DM3 takes 1 DC Input and provides 3 isolated outputs all directionally proportional to the input. The outputs can all be of the same D.C. Value or can be diffrent.Typically this product is used to prevent earth loops between measuring devices. For example the M100-DM3 could have its input signal provided by a M100-WA4 watt transducer with 4-20mA output. The 3 outputs from the M100-DM3 could be as follows:Output A = 4-20mA fed to a PLCOutput B = 0-20mA fed to an analogue meter scaled in kWOutput C = 1-5V fed to a chart recorderThe isolation between the Input/Output/Case is 1.5kVand the isolation between each output is 500VTechnical SpecificationsINPUTRated value In±0-1/5/10/20 & 4-20mAVoltage drop20mVRated value Un±20mV-10VImpedance100kOhm / voltWorking Range±125% InOverload Continuous4 x InOverload Continuous1.5 x InOUTPUTRated value mA0-1/5/10/20 & 4-20mALoad Resistance10/2/1/0.5 kOhmRated value volts0-5/10&1-5VADJUSTMENTZero±2%Span±10%AUXILIARYA.C. Voltage115/230/400V(±25%/45-65Hz/<2VA)D.C. Voltage24/48/110V(±20% /galvanically isolated / <3W)WEIGHT&CASE SIZEApprox 0.4kg. 100mm caseINSULATIONTest Voltage1.5kV between Input/Output/Case500 volt between each outputOrdering InformationProduct CodeInput InOutputAuxFreqOptionsM100-DM31mAA=1mA230V50HzB=4-20mAC=10VOptions1Non standard inputs / outputs as far as technically viable2A.C. Auxiliary in range 57.7 to 450 volts3Calibration at temperature other than 23CA.C. Current Connection Diagrams

For more information on DC Current Or Voltage 1 In 3 Out talk to Howard Butler Ltd