Gaskets (Gasket Manufacturers)|Butser Rubber

Butser Rubber Ltd is a specialist supplier and manufacturer of cut gaskets and moulded gaskets in rubber and silicones. Butser Rubber manufacture Gaskets from 2 main processes: 1. Moulded Rubber Gaskets 2. Cut / Converted Gaskets from Sheet. Both methods provide customers with a range of Benefits. Moulded Rubber Gaskets allow customs to choose spec rubber or silicone materials; the customer also has greater control over thickness tolerances. Cut gaskets provide customers with cost effect tooling and gasket / sealing solution with very quick turn around times from drawing to production. Moulded Rubber Gaskets Butser Rubber can manufacturer moulded rubber gaskets from the following rubber materials: Natural Rubber Neoprene Rubbers (Chloroprene Rubber) Silicone Rubber Hydrogenated Nitrile Rubber (HNBR) Nitrile Rubbers (NBR, Buna N) Platinum Cured Silicone Rubber Epichlorohydrin Rubber Neoprene (Chloroprene) Sponge Fluorosilicone Rubber Ethylene-Propylene-Rubber (EP and EPDM) Butyl Rubber Fluorocarbon (FKM) (Viton*) Rubber Polyurethane Rubber Polynorbenene Rubber (Norsorex) . For more details on the grades of rubber that can be used to manufacture rubber gaskets, please visit www.butserrubber.com/materials. All of the above materials are for moulding rubber gaskets to your exact requirements. Butser Rubber (GASKET MANUFACTURERS) hold a wide range of rubber and silicone rubber raw compounds in stock. This provides our customers with short lead times and fast response to UOR and Rapid Prototyping. For a full list of raw rubber compounds commonly stocked by Butser Rubber please visit www.butserrubber.com/materials. Cut or Converted Gaskets Butser Rubber can also manufacture gaskets from a wider range of gasket materials using gasket cutting technology. Butser Rubber use laser cut precision cutting knifes to press out gaskets from sheet material. The precision cutting knifes allow Butser Rubber to manufacture cut gaskets to a very high level quality. For example of the cut gaskets manufactuered and supplied by Butser Rubber, please visit www.butserrubber.com/products. Cutting gaskets from sheet allows gaskets to be cut from a wide Varity of materials which can either be manufactured in house by Butser Rubber but injection or compression moulding (This allow high levels of tolerance on spec sheets) or materials that can be purchased through the supply chain. Materials that are commonly Cut in to Gaskets and Seals Butser Rubber Ltd: Neoprene Sponge Neoprene and EPDM Sponges Form Rubbers Silicone Sponges Plastazote Materials Cork Bonded Nitrile/Neoprene Nylon-reinforced Rubber sheet gaskets (Insertion Materials) Felt to BS standards Cork in a range of thickness Leather Sheet 3M transfer tapes used Paper and Cards All of the above can be adhesive backed using a range of tapes and glues. For a full list of rubber/Silicone and non rubber materials available from Butser Rubber please see www.butserrubber.com/materials. Butser Rubber: for all your gasket needs in rubber, silicone, sponge and card.

For more information on Gaskets (Gasket Manufacturers) talk to Butser Rubber Ltd (Rubber Moulders)