Product Code: , Price: £phone
Used for checking and setting for example:
• Alignment (series of bores or bearings)
• Squareness (column to a base)
• Parallelism (series of rollers)
• Level/flatness (machine bed foundation)
• Straightness (rails or guideways)
With its optical and mechanical axes aligned to within 3 seconds, a typical accuracy of 50-70um at 30m is achievable.
Accuracy: Within 0.05mm (0.002in) at 30m (100ft) and proportionally for longer or shorter distances down to about 3m (10ft). Below this distance the errors are less than the precision to which the micrometers can be read.
< previous product
|
all products
|
next product >
Used for measuring for example: Angle, Straighness, Squareness, Parallelism. From inexpensive visual...
Spectrum Metrology is the approved distributor for the Taylor Hobson range of workshop surface rough...