CHASSIS RESTORATION VALUE PACK - BLACK

CHASSIS RESTORATION VALUE PACK IN BLACK ? This kit contains a set of products that are ideal for the restoration of a vehicle's underbody, giving it a hard wearing coating. It gives you the products you need for most surface preparation situations AND Rustbuster's award-winning EM121 Rust Proofing Paint.? It is suitable for preparing and painting: Chassis rails. Sub frames. Suspension components. Floor pans - inside or out, Wheel arches. Roll bars. And other components that need super durable protection. With this kit you can prepare and paint all of these, whether the surface is bare metal, lightly corroded with surface rust, covered with a well adhered old coating, or a mix of these. The kit gives you a system for addressing issues with the surface and coating it for long lasting protection.? The kit contains all of the following:? 1 ltr Rustbuster Chlor-X Salt Remover DTS (direct to surface) formula Spray this solution direct from the trigger spray bottle onto the area to be treated PRIOR to using the SP10 cleaner.?Chlor-X will lift residual surface salts and allow them to be completely removed. Apply to the steel, leave for 5-10 minutes and then degrease with the SP10. More information about Chlor-X Salt Remover.? 1 ltr Rustbuster SP10 Detergent This is an extra strong concentrated caustic detergent, which degreases metal surfaces. For chassis restoration work and similar projects, use it diluted four parts water to one part SP10. Apply with a?strong bristle brush, working it into the steel. Then rinse off with Chlor-X DTS or deionised water.?More information about SP10 Detergent. After using the Chlor-X, SP10 and a final rinse you now have a salt-free, grease-free surface. You will now want to use a wire brush or mechanical equipment to remove any loose rust. The big advantage of using the Chlor-X and SP10 prior to wire brushing is that you won't be pushing salt or grease into the pores of the metal. 500 ml Rustbuster Fe-123 Rust Converter Where any areas of your steel is displaying signs of surface corrosion, Fe-123 reacts with the oxides and converts these to a stable, ready-to-coat surface. More information about Fe-123 Rust Converter. 2.25 ltr Rustbuster EM121 Epoxy Rust Proofing Paint Rustbuster's award winning chassis restoration epoxy coating can be?applied over Fe-123 or direct to the steel. It forms a high build barrier against further rust and corrosion. Easy to mix in a simple 1:1 ratio and can be applied by?brush or spray. Covers approx. 10m2. More information about EM121 Epoxy Rust Proofing Paint. Optional Extra: Gravity Spray Gun?? You can choose to add a high quality LVLP 1.8mm gravity spray gun that is compatible with spraying Rustbuster EM121.?Operating pressure 50- 80 psi.?Requires 9-12 cfm depending on set up. More information about LVLP Gravity Spray Gun. ? Downloads and Media Epoxy EM121 RAL Colour Card

For more information on CHASSIS RESTORATION VALUE PACK - BLACK talk to Rustbuster Ltd