search

BATTERY POWERED MEWPS: WHAT YOU NEED TO KNOW

BATTERY POWERED MEWPS: WHAT YOU NEED TO KNOW
08/11/2017

Most site breakdowns or down time on battery powered MEWPs are due to lack of maintenance or incorrect use by the hirer. However, a little care and maintenance can help you to save time and money, and ensure optimum safety and productivity.

When hiring an electric or bi-fuel machine, think about what you need on site to be able to charge the batteries. Most machines will need at least a 2.5 KVA continuous power supply transformer, a minimum cable size of 2.50mm and an extension lead no longer than 10m. Also, it’s very important that the lead is not wound around a drum or reel during charging as this causes a build up of heat and could cause the cable to fail or catch fire.

When a MEWP is delivered, the batteries will no longer be fully charged due to loading and unloading, so to get maximum use out of the machine it will need to be placed on charge.

Ensure that you have a suitable area on your site to charge the batteries safely. This area needs to be well ventilated and away from well-used walkways.

Remember that the lower the charge in a set of batteries the longer that it will need to fully recharge. If you regularly fully discharge batteries without allowing them the correct amount of time to recharge they will eventually fail.

Before using the MEWP, always check the level of charge. Some machines will have a series of LED lights and others will have analogue meters that display the amount of charge remaining. When the batteries are fully charged, remove or isolate the machine from the power supply first before disconnecting the lead from the machine.

Never attempt to operate a MEWP whilst it is charging or connected to the mains because it could cause the charging system to burn out. Plan your work so as to get the most out of the charging time available and, if possible, place the machine back on charge when it is not in use, and inspect the batteries on a daily basis.

To maximise battery life, avoid carrying and lifting unnecessary weight in the platform and driving the machine great distances. Try and keep work cycles short.

For more information follow this link: BATTERY POWERED MEWPS: WHAT YOU NEED TO KNOW

Enquiry Form



More News

Haileybury School Publicity Shoot

Haileybury School Publicity Shoot

Haileybury was originally founded in 1806 as a training establishment for the East India Company but closed in 1858. In 1862 it opened again as a publ...

Read More
A guide to buying an access platform

A guide to buying an access platform

A guide to buying an access platform Access platforms can be used to complete any work that needs to be done at height, and there are many different ...

Read More
Why you should have your cherry pickers and access platforms serviced regularly

Why you should have your cherry pickers and access platforms serviced regularly

Why you should have your cherry pickers and access platforms serviced regularly Access platforms and cherry pickers are usually very sturdy, reliable...

Read More

Read More

Read More

List your business

Would you like to register your company on one of the UK's largest and most effective Trade websites?

Are you looking for a reliable and consistent source of enquiries from your industry sector? Would you like to see why Find the Needle clients come back year after year to use our service? If so then feel free to register using the link 'here'.

Register
Office Address: