search

Decontamination Chamber WiC

Decontamination Chamber WiC

Product Code: MD-C

Our large capacity material airlock is ideal for hydrogen peroxide vapor decontamination of large material and equipment loads in laboratories and clean rooms. It comes configured to plug and play with a state-of-the-art Bioquell HPV Clarus generator, using Bioquell’s patented dual loop technology for unmatched efficiency.

With over 70 HPV fumigation chambers in active use, PBSC and Bioquell provide a highly reliable system which will provide long lasting results over many years, which has been proven in the field and material compatibility testing is available to provide proof of efficacy before committing to the hydrogen peroxide material decontamination chamber.

Effective against a wide range of microorganisms and viruses, the MAL chamber is much more energy efficient and gentler on equipment than large autoclaves. With a HPV generator, it can even be used on heat sensitive items, electronics such as laptops and calibration devices.

The chamber is fitted with an onboard PLC that monitors all critical parameters of each cycle. Various chamber sizes and both solid core or stainless steel pneumatic seal doors are available.

The entire cycle is run via the colour touch screens on each side of the chamber, which provides information on all the critical chamber parameters.

The chamber can operate with connection to the HVAC system or alternatively it can be fitted with the APB (Air Purge Boost) system which takes fresh air through the chamber which can then be ducted directly to atmosphere, providing quick reliable and safe cycles without any added strain to the HVAC system.

The standard doors are solid High Pressure Laminate air seal doors which offer excellent chemical resistance, and are used in high containment solutions around the world. These are supplied with large vision panels in each leaf for excellent visibility. An option is also available to use stainless steel inflatable air seal door leaves.

The chamber has no need for free space to the side of the chamber for servicing as access is provided via a service door in the front of the chamber.

It is used globally in facilities to eradicate problematic bacteria, viruses and fungi throughout the healthcare, life sciences, pharmaceutical, food production and defense sectors.

Key features

• No pit in the floor or side access for service required • Large Vision Panels, with True Flush Glazing to both sides. • Reliable and proven sealing with inflatable seal doors. • Internal power sockets, to allow electrical items to be run during the fumigation cycle. • All critical parameters controlled via the chamber PLC • Flush thresholds allow easy loading/unloading of carts (change to: walk-in use with wheeled trollies etc.?) • Full Range of aeration options to suit customers’ requirements • Decontamination cycle times as short as 60 minutes • Full service support contracts available to suit GMP and Life Science facilities. • Validated Log 6 cycles

Options

• HVAC assisted aeration or APB with exhaust to atmosphere • Low Level H202 sensors • Internal compressed air supply for door sets • Stainless steel or HPL door sets • Right Angle Design – Bespoke sizes available on request • Yokogawa Data-Logger • 304 or 316 stainless steel construction

For more information please contact info@pbsc.co.uk

For more information on  Decontamination Chamber WiC  talk to  PBSC Limited

Enquiry Form



More Products

Vision Panel Secondary Glazing

Vision Panel Secondary Glazing

PBSC’s secondary glazing vision panels, provide a flush glazing to the inside of the lab, when standard external windows are used on the outside of th...

Read More
Decontamination Hatch C2C IG

Decontamination Hatch C2C IG

Loading of H202 on chamber Rapid Decontamination Cycles from 35 minutes Solid Core Inflatable Seal Doors Integrated Generator The material fumigati...

Read More
Phenolic Resin Door Set

Phenolic Resin Door Set

Looks can be deceiving, these doors are strong and robust. Ideal for laboratory, clean room and corrosive environments, these doors are incredibly to...

Read More

Read More

Read More

List your business

Would you like to register your company on one of the UK's largest and most effective Trade websites?

Are you looking for a reliable and consistent source of enquiries from your industry sector? Would you like to see why Find the Needle clients come back year after year to use our service? If so then feel free to register using the link 'here'.

Register
Office Address: