search

6mm - 10m Oxygen Hose (Blue) - 3/8 BSP

6mm - 10m Oxygen Hose (Blue) - 3/8 BSP

6mm Bore Oxygen Hose - 10m long with 3/8" BSP Fittings

High quality standard oxygen hose in a 10 meter length.Noz-Alls sayThis hose is perfect for your standard cutting torch or welding setup. We supply this hose with a 3/8" BSP right hand nut for connection to your flash back arrestor and a 3/8" BSP hose check valve (HCV) for connection to the oxygen inlet on your torch / shank.

Noz-Alls supply European hose with our own designed hose check valve - the reason for this is that many HCVs supplied with hoses from even some of the most reputable manufacturers are not leak free. Our HCVs are all 100% tested in Cheltenham and are tested to ensure they are leak free from 6 millibar (0.087 psi).

Many of the common size hoses we will supply with hose crimpings as made by the hose manufacturer but we also carry unfitted hose coils to make hoses up to order. When making a hose up ourselves we use the best O clip on the market. The Oetiker stainless steel single ear O clip with tongue which offers a full 360 degree seal around the head of the nipple. We only use Knippex original pliers to tighten these O clips, put simply, the proper tool for the job.

Many suppliers of hoses are not fully aware of the BS EN standards with regards to the fittings that should be used. Our hoses are all fitted with nuts that conform to the correct standard and nipples / hose tails that are of the correct design, i.e. an oversized barb which usually requires the hose to be heated to push on. Theoretically once fitted they should not leak even without an O clip. Other nipples that get used simple slide into the hose and rely on the crimp or the clip to keep the hose attached.

For more information on  6mm - 10m Oxygen Hose (Blue) - 3/8 BSP  talk to  Noz-Alls Ltd

Enquiry Form



More Products

CA2024 - SifMig 316LSI 0.6mm

CA2024 - SifMig 316LSI 0.6mm

Please enquire for more information about this item.

Read More
Oxygen Regulators

Oxygen Regulators

For further information about Oxygen Regulators please contact us.We are often asked if we have a catalogue. The simple answer is no but the truth of ...

Read More
CB2010 - SifPhosphor Bronze No8 3.2mm

CB2010 - SifPhosphor Bronze No8 3.2mm

SifPhosphor Bronze No8 3.2mmThe phosphor bronze rod contains 7% tin and is suitable for fusion welding of phosphor bronze castings and copper alloys (...

Read More

Read More

Read More

List your business

Would you like to register your company on one of the UK's largest and most effective Trade websites?

Are you looking for a reliable and consistent source of enquiries from your industry sector? Would you like to see why Find the Needle clients come back year after year to use our service? If so then feel free to register using the link 'here'.

Register
Office Address: