search

HOW TO MEASURE AND IDENTIFY HYDRAULIC THREADS

HOW TO MEASURE AND IDENTIFY HYDRAULIC THREADS
25/03/2013

This is something I often get asked; ” How do I know what thread it is?”

Our aim is to deliver you with all the help you need to successfully measure and identify hydraulic fittings threads, by using this thread guide. Hopefully by the end of reading this post you will be a little more informed, and find the process less daunting.

First off, we have a PDF guide on the website, which covers the size range, and I will reference to this in the post as it has all the technical data in there.

If you want to download, save and print a copy of the thread guide, then please visit the link here.

http://www.hoses.co.uk/images/datasheets/hydraulicthreadguide.pdf

Things will you need:

Thread/Pitch Tool – (Ideally) Vernier Calipers - Preferably digital and calibrated for a more accurate reading (Essential) A variety of fittings for testing this out on The first thing to do is establish is the thread gender, do we have a “male” or “female” thread? The easiest way to see this is, Is the thread on the outside (male) or on the inside (female)

Below is a bush – this shows both the male and female thread. With the male on the outside

After we have looked at the fitting, and identified the gender, we can then measure it using the vernier callipers. As you can see from this fitting, it is a male thread, and I have got a measurement of 20.81mm . In some cases this may be enough to identify the fitting, but to be certain we would also confirm the seat angle, and the Threads Per Inch (TPI)

Looking at my hydraulic thread guide PDF, on page 3, under the BSP threads, and the male thread OD mm column, I can see a size 1/2″ has a male thread OD of 20.8mm. The 1/2″ ORFS on Page 5 comes close at 20.6mm, all the other threads are too far out.

So we move on to the TPI, where the BSP has 14 TPI and the ORFS has 16 TPI. This is where we would use a thread pitch tool. Using my pitch guide I can see this is 14 TPI

If you do not have this tool, there is another way. But I must state this is a rough guide, and do not want to be held responsible. Using the vernier we can count the threads across a 1″ measurement, or 1/2″ measurement, then double that number. This isn’t the most accurate way, but it will do if you do not have all the tools.

But the main difference in the BSP threads and the ORFS, is the seating. The BSP usually has a 60° cone seating, whereas the ORFS has a O Ring in the face of the male thread.

Some tools will have a seating angle measurement as well. Using the tool I can see this is a 60° cone seating, which confirm to me this is definitely a 1/2″ ( -8 ) BSP Thread.

If you are not confident measure threads, we can of course guide you through it , or you send in your fittings and we will identify them. We can make hoses to your specification without you having to call out an on=site hydraulic hose repair company.

For more information on  HOW TO MEASURE AND IDENTIFY HYDRAULIC THREADS  talk to  Hoses Direct Ltd

Enquiry Form



More News

HOSES DIRECT SUPPLY CADDY MACROFIX CLIPS FROM THE UK TO THE USA

HOSES DIRECT SUPPLY CADDY MACROFIX CLIPS FROM THE UK TO THE USA

Supply of : Over 3000 Caddy Clips to a US Pipe Fitting Supply Company So how did it start ? It started off with an email back in October 2012, a P...

Read More
HOW TO MEASURE AND IDENTIFY HYDRAULIC THREADS

HOW TO MEASURE AND IDENTIFY HYDRAULIC THREADS

This is something I often get asked; ” How do I know what thread it is?” Our aim is to deliver you with all the help you need to successfully measure...

Read More
REPLACING A DAMAGED PRESSURE WASH HOSE ASSEMBLY

REPLACING A DAMAGED PRESSURE WASH HOSE ASSEMBLY

At Hoses Direct, we offer all types of hose assemblies, which includes jet wash / pressure wash hose assemblies, both for domestic and industrial use,...

Read More

Read More

Read More

List your business

Would you like to register your company on one of the UK's largest and most effective Trade websites?

Are you looking for a reliable and consistent source of enquiries from your industry sector? Would you like to see why Find the Needle clients come back year after year to use our service? If so then feel free to register using the link 'here'.

Register
Office Address: