search

Glasstex Blueshield System

Glasstex Blueshield System

The system works by applying the Glasstex® Blueshield® Adhesive to the chosen surfaces, the Glasstex® Wallcovering is then applied onto the adhesive and after drying (approx. 12/24hrs dependent upon conditions) the Glasstex® Blueshield® Base Coat is then applied to the wallcovering.Applying a coat of water-based paint of the client’s choice and colour will complete the decorative finish.Preparation: Surfaces should be sound, dry, clean and free from damp, dust and grease, and should be lightly abraded before application.Instructions for use: Stir well before use. Do not dilute. Apply by brush or roller to the surfaces. Always maintain the open time of the adhesive. Do not use at temperatures below 10°C (50°F).Coverage: Approximately 3.5sq metres per kg.Cleaning: Tools and equipment should be cleaned with water immediately after use.Cautions: This adhesive contains fungicide to protect against mould growth and should be kept away from children and animals. Do not expose to extremes of temperature.Can only be used in conjunction with Glasstex® Wallcoverings and Blueshield® Basecoat to achieve Class ‘O’ certification.Hanging Glasstex fibreglass wallcoverings presents no problems for the professional painter and decorator.Cut off the Glasstex in lengths using a sharp knife and straight edge. Measure the height of the wall + 10cm. Apply the Glasstex at the ceiling and press down. Make sure that the first length hangs vertically - it can also be fixed straight from the roll.Hang the Glasstex with a butt joint and apply it with the horizontal pattern matching threads, thread - to thread. Press well onto the surface with a plastic or steel spatula. Trim neatly at the ceiling and floor with a sharp knife.Instructions for use: Apply by brush, or roller. Blueshield® Base Coat dries in about 4 hours depending on temperature and relative humidity.Coverage: Approximately 30sq metres per 5ltr.Cleaning: Being water based, all brushes and tools can be cleaned with warm water.Cautions: Can only be used in conjunction with Glasstex® Wallcovering and Blueshield® Adhesive to achieve CLASS ‘O’ certification.A decorative system that has been applied to warringtonfire standardised multi layer painted board (Blue Board) and tested at warringtonfire in accordance with BS 476: Part 6 (Fire Propagation) and BS 476: Part 7 (Surface Spread of Flame) and the test results comply with the requirements for a Class O rating as defined in paragraph A 13(b) of Approved Document B (Fire Safety) to the Building Regulations 2000.

For more information on  Glasstex Blueshield System  talk to  Eclipse Wallcoverings

Enquiry Form



More Products

Glasstex GTP38 Japan

Glasstex GTP38 Japan

Glasstex GTP38 Japan designs - from Eclipse Wallcoverings.The design of the Glasstex GTP38 Japan takes inspiration from Japanese woven strawProduct Co...

Read More
Microlith Wall Liner

Microlith Wall Liner

The hugely successful Scandatex Wall Liner range has recently been made even better. The new product range under the brand name of Microlith, features...

Read More
Non-Toxic, Eco-Friendly Wallcoverings

Non-Toxic, Eco-Friendly Wallcoverings

Non-Toxic, Eco-Friendly Wallcoverings TEXTURED WALLCOVERINGS GET TOUGH Glass Textile Wallcoverings are Stylish Hard-wearing, Healthy and Safe... ...

Read More

Read More

Read More

List your business

Would you like to register your company on one of the UK's largest and most effective Trade websites?

Are you looking for a reliable and consistent source of enquiries from your industry sector? Would you like to see why Find the Needle clients come back year after year to use our service? If so then feel free to register using the link 'here'.

Register
Office Address: