search

High Speed Volume Cutting Production

High Speed Volume Cutting Production

Advantages for manufacturers in high-speed volume production Today’s buyers want higher quality at lower prices, delivered just-in-time. Suppliers have to remove time and costs, as far as possible, from the component-manufacturing process.

This should start with the blanks required for subsequent CNC machining or forging processes. Producing blanks at the right time, and with the required precision, can save money in materials and tooling, and through reductions in subsequent process times.

For many high-volume sawing applications, the days of bandsawing are numbered. The latest carbide circular saw technology is here, and can generate major benefits over conventional bandsawing methods.

The carbide circular sawing machines installed by Accurate Cutting Services, used in volume production throughout the day and night, are capable of cutting up to 110mm diameter steel or aluminium material, to a very high standard of precision.

They enable customers to achieve significant savings through reduced material loss, improved tool life and lower WIP, from closer tolerances in the initial stages of CNC machining, and no (or fewer) feeder jams or broken tooling/dies.

Sawing capabilities With this carbide circular saw technology:

poor cut length tolerances of 0.5mm to 1.0mm are a thing of the past: these carbide machines can achieve consistently tight tolerances down to +/-0.15mm with a ppk of better than 4.0 (dependent on measured characteristic), due to their robust construction and three-point carbide blade guide padspoor squareness of 0.2mm to 0.5mm is improved to typically better than 0.1mm per 30mmthe poor surface finish resulting from a band saw is replaced by a ‘milled’ finish (depending on the material properties) small trim cuts and bar end (typically 10mm and 100mm), and no out-of-spec components, mean high yield from raw material (exact figures are dependent on raw material length and component length) the saws clamp the material in front of and behind the saw blade, to prevent the heavy breakoff tags and burrs often found on band-sawn components: these components are CNC machine-ready, bringing significantly fewer misfeeds or jams in hopper-fed machines intelligent machine design eliminates almost all swarf contamination from the bins with cut blanks: components can be discharged straight to bins with no swarf carry-through, again reducing the risk of jamming hopper-fed CNC machines the components have a minimal residual coating of oil on cut surfaces, as the machine uses a total consumption lubrication system: this means no coolant build-up in bins, and dry swarf.

Enquiry Form



More Products

Rough Profiling & Sectioning

Rough Profiling & Sectioning

Valuable savings from rough profiling and sectioning At Accurate Cutting Services, specialist heavy-duty vertical band saws produce substantial savin...

Read More
Friggi 2MF gantry bandsaw

Friggi 2MF gantry bandsaw

Bandsaw with fixed table and movable portal to cut very heavy material of large sizes. Its capability to cut in vertical, horizontal and diagonal dire...

Read More
1500mm Reactor Vessel Cylinder

1500mm Reactor Vessel Cylinder

After a great 47 years of sawing, Accurate Cutting Services Ltd is still the private family owned business it started as. However, it has increased in...

Read More

Read More

Read More

List your business

Would you like to register your company on one of the UK's largest and most effective Trade websites?

Are you looking for a reliable and consistent source of enquiries from your industry sector? Would you like to see why Find the Needle clients come back year after year to use our service? If so then feel free to register using the link 'here'.

Register
Office Address: