The initial system is the same as the Water Only process, however once the jet passes through the orifice it enters a mixing chamber. This creates a vacuum, transferring controlled amounts of abrasive into the jet stream. The water and abrasive mixture is realigned in a focusing tube giving a cutting width of 0.8/1mm.
The abrasive water jet cutting process is capable of profiling virtually any sheet or plate material from Aluminium to Titanium.
Gee Graphite has installed a variety of single and multi-head abrasive cutting machines capable of economically producing single prototypes to volume production batches.
The kerf with an abrasive nozzle is normally 1mm diameter. The term kerf deviation is derived from the reduction in diameter through the thickness of the workpiece. The faster the material is cut the rougher the surface finish.
There are two distinct cut qualities available, Separation Cut with a deviation up to 0.5mm through the thickness, Quality Cut with a deviation of 0.1/0.2mm through the thickness.
Special sign profiles to complete company refits.
Aluminium/Plastic to Stainless Steel and Brass cut without tarnishing.
Complex and intricate designs easily accommodated
Special designs and logos cut with precision.
Ceramic floor and wall tiles to your design.
From Pub entrances to Shopping malls.
Granite, marble, slate and limestone designs also created.
Engineering components
Laminates and Composites without delamination.
No heat affected zone
< previous product
|
all products
|
next product >
Geegraf graphite tapes are produced in house using the latest CNC controlled slitting equipment, thi...
Expanded Graphite Foils, Corrosion, Oxidation Resistant and Ultra High Purity Grades.