BRUSHCUTTERS and STRIMMERS

FN Pile and Sons can supply a range of BRUSHCUTTERS and STRIMMERS from leading manufacturers such as Ariens, Echo, Honda, Husqvarna, Mantis, Mountfield, Pellenc, Stihl and Tracmaster, to suit all your gardening needs. Now includes the innovative cordless models from Mountfield and Stihl. ARIENS String Trimmer: Trimmer 946350 This is no ordinary string trimmer. 22-inch cutting diameter and 149cc engine for trimming tall, tough grass. Pivoting head swivels 15° for cutting precise lines, even in hard-to-reach areas. Tough 14-gauge stamped deck. 15° pivoting head and 22-inch cutting diameter for precise trimming Large all-terrain wheels and 14-gauge stamped deck for durable trimming anywhere Powered by a low-maintenance and quiet 149cc Kohler XT-650 engine. ECHO: SRM 236 TESU SRM 222 ESL SRM 335 TES SRM 222 ESL GT 222 ES ECHO pioneered the petrol-powered brushcutter over 50 years ago. Today, ECHO remain a leading innovator of low-vibration, low-emission high torque products. Ergonomic designed controls, a smooth running ‘Easy Start’ engine (on most models) and proven reliability in all conditions – it’s easy to see why ECHO brushcutters and trimmers are the choice of professional landscapers and homeowners worldwide, whether it’s for trimming lawns or tackling the toughest long grass and scrub. HONDA: UMK 425LE UMK 425 UE UMK 435 LE UMK 435 UE UMS 425 LN Designed for heavy-duty work, these robust Brushcutters can do any job expected of them. There are no areas that stubborn undergrowth can hide. You can boldly go where no other brushcutter can, with these extremely tough and reliable 4-stroke garden tools. They are driven by a unique six-splined drive shaft (as opposed to a traditional groove key design) for added strength, with better torque and power delivery down to the work zone. Brushcutters feature a special type of non-contact bearing. The same as those used by NASA, these bearings are renowned for their resistance to dust contamination, and are the best for ultra high-speed work. These bearings run freely with little resistance and are extremely quiet. They last much longer than the traditional full-contact rubber seal type – which can easily become contaminated with dust, overheat and wear out sooner than you think. HUSQVARNA: Great results in less time. Trimming, clearing and brushcutting means hard work on any farm. We figure the best way to tackle it is smart power combined with well-balanced low weight and lots of ergonomic features. 525 RJX 525 RX MANTIS Little Wonder Hydro Brush Cutter: 5126-22-59 With You Through Thick and Even Thicker The Little Wonder Hydro Brush Cutter navigates through weeds, heavy brush and overgrown vegetation with ease. Tempered spring steel 26”/66cm blade cuts tall weeds, brush, and saplings up to 2”/5cm thick. Our welded steel frame design and engine positioning provide excellent balance regardless the terrain. Our hydrostatic transmission offers infinitely-variable, clutch-less speed selection – up to 4.2 mph forward and 1.7 mph reverse. So you can cut your own path at your own pace. You’ll tackle tough jobs like these and more: Clearing small areas, orchards, around barns or buildings Clearing embankments Establishing small trails or paths Opening riding trails Clearing around ponds Highway guard rail maintenance Features: Available in a durable Honda® GXV390. Solid rods connect the operator to the transmission, park brake, cutter blade clutch – no cables to break or adjust. Honda® model features 16”/40cm foam-filled NO-FLAT, puncture-proof bar tread tyres for excellent traction and ground clearance on rough terrain Hydrostatic Transmission offers infinitely-variable, clutch-less speed selection – up to 4.2 mph forward and 1.7 mph reverse. 7 - 10 - 12 gauge welded steel engine base, cutting deck, rear frame and control handle construction for rugged durability and reliability in toughest brush and terrain conditions. Cuts brush, tall weeds, and saplings up to 2”/5cm thick Adjustable 1.5”/4cm wide, .25"/6mm plate steel skid shoes for excellent flotation over rough terrain. 1”/25cm diameter mower blade spindle is supported by top and bottom sealed ball bearings inside a machined steel hub, a heavy-duty welded outer steel flange and grease fitting to prevent moisture Speed Limiter Dial allows a firm grip on the control handles right from the start and speed selection while on the go. Tempered spring steel 26”/66cm blade cuts tall weeds, brush, and saplings up to 2”/5cm thick Easy access service points Two year warranty MOUNTFIELD 48 volt Lithium-Ion cordless grass trimmer and lawn edger MT48Li Use with either the 2.0Ah or 4.0Ah 48 volt lithium-Ion battery (available separately) The Mountfield MT48Li 48V grass trimmer and edger is perfect for jobs around your garden. It's versatile and easy to use and you'll have no bother of a mains cable snagging in plants or furniture. Lightweight and ergonomic, with easily adjustable head angle and front handle position, this tool will suit all gardeners. Simple to start, you will get up to 40 minutes trimming time with the 4Ah battery fitted - more than enough for most gardens. The auto feed head and line knife keep the working width at a convenient 12 inches. Simply stop and restart the trimmer to automatically feed out more line. For trimming borders and lawn verges, just press the button to rotate the head through 45 degrees. The guide wheel will help you achieve a clean cut and beautiful finish every time. The Mountfield MT48Li grass trimmer and edger, part of the Mountfield Freedom48 range. One powerful 48V battery, multiple garden tools. Lightweight and ergonomic design for comfortable use Easy push button start Rotating head with guide wheel for trimming edges Automatic line feed head Up to 40 minutes typical run time (4.0Ah Battery) PELLENC Excelion 2000 Brushcutter: Robust, powerful and lightweight Designed for routine maintenance or intensive strimming, the EXCELION 2000 Professional will meet the expectations of even the most demanding users. This robust, powerful and lightweight brush cutter perfectly eliminates tall, dense grass, woody weeds, brambles and shrubs. Powered by a PaELLENC ULiB 1100 battery, it’s quiet, non-polluting operation, and low vibration increases comfort for the user. Several cutting heads can be used on the EXCELION 2000, offering different options for getting the job done. STIHL Grass Trimmers and Brushcutters: Made-to-measure performance for woodland, meadow and garden STIHL grass trimmers, brushcutters and clearing saws quickly tame long grass and undergrowth. The machines can be fitted with the appropriate cutting tool for mowing small areas of grass to thinning out overgrown thickets. The models with the STIHL 4-MIX engine produce significantly less exhaust gases than conventional two-stroke engines, giving you increased fuel efficiency and causing less damage to the environment. STIHL KombiSystem and MultiSystem: A lot of garden. One system. The STIHL KombiSystem is a powerful petrol engine with a choice of KombiTool attachments : whether it's trimming hedges, edging lawns, turning borders or sweeping paths the STIHL KombiSystem will take the effort out of those tough garden jobs. The all-purpose MultiSystem from STIHL soon has your garden shipshape again. Whether for tending the lawn, cultivating the soil or clearing large areas with the STIHL MultiSystem, only one machine is needed for all the various jobs. You alone decide what you want and need. TRACMASTER Crusader Power Scythes: BCS 615L 615 SL 630 BCS Power Scythes are versatile and powerful machines that can be used for a wide variety of different applications. From taming dense vegetation to creating beautiful wildflower meadows, these unique tools are ideal for managing all types of environments successfully and are widely used in meadows, woodlands, reedbeds, orchards, paddocks, pathways, conservation sites and many other locations across the UK. BCS Power Scythes will cut vegetation of any height up to 1" diameter, even material that towers over you; typical applications include cutting long grass, brambles, bracken, gorse, wildflowers, reeds, thistles, nettles, weeds and saplings.

For more information on BRUSHCUTTERS and STRIMMERS talk to FN Pile and Sons