The ST730 meets all the requirements for a flexible wire processing machine. Challenging stripping of coax- or triaxial cable is a breeze for the ST730 to handle. Of course, multi-conductor cable or single wire with special insulation such as Kapton or Teflon can also be processed.
The handling is very easy: insert the cable and the sensor will start the stripping cycle. The ST730 strips the outer jacket, the shield as well as the dielectric within seconds very precisely.
Set up times are practically eliminated because when selecting stored cable parameters the machine sets itself up. The job is further simplified through the build in counter and the ability of setting sequences. The intuitive operation allows for quick and reliable machine settings when changing to a different cable. Stripping parameters can be protected by selecting a password through authorized personnel.
The stripping machine ST730 impresses, due to its high quality workmanship, longevity and guaranties the highest flexibility with sustained productivity!
Features
Outer cable diameter max 7 mm (0.28’’)
Stripping length up to 30 mm (1.18’’)
Adjustable diameter feed rate
Adaptive clamping force
Wayback or partial strip
Sensor activated start cycle
Foot pedal activated start cycle (optional)
Left or right rotation/twisting
Suitable for Teflon and Kapton isolations
RS232 interface
100, 115 and 230VAC power supply
Options
Wincoax
Software for Data backup and for visualization
Footpedal
< previous product
|
all products
|
next product >
This manual 500 newton cable and crimp Pull Tester comes complete with sliding terminal grip with va...
Stripping Blade sets available from 0.25 to 2.50mm